Product model | KJT-FDQ-N11
|
Light source (luminescence wavelength) | Red, 4-Element Light Emitting Diode (624nm) |
power supply voltage | DC12~24V±10% fluctuation (p-p) less than 10% |
Power consumption/power consumption | 600mW or les |
Контроль выхода | Open collector output type (NPN or PNP) Load voltage 30V or less, load current 50mA or less (residual voltage: 1V or less) ON when exposed to light/ON when protected from light switching type |
Время отклика | Action and reset: 200 µs or less each |
Корректировка чувствительности | 8 Turn the full-turn knob (with indicator) |
защитный коаксиальный ультра - высокой частоты УВЧ типа бабочка | Power reverse connection protection, output short circuit protection |
Timer function | No timer, with OFF delay timer Switch type (timer time: fixed at 40ms) |
Use ambient illumination | Surface illumination: Incandescent lamp: 10,000x or less, Sunlight: 20,000lx or less |
Number of connected units | Up to 16 units (ambient temperature specifications vary depending on the number of connected units) |
Ambient temperature | when connecting 1~3 units: -25~+55°C, When connecting 4~11 units: -25~+50°C, When connecting 12~16 units: -25~+45°C Storage: -30~+70℃ (no icing or condensation) |
Withstand voltage | AC1,000V 50/60 Hz 1min |
Vibration (durability) | 10~55Hz double amplitude 1.5mm in each direction of X, Y and Z for 2h |
Impact (durability) | 500m/s² 3 times in each direction of X, Y and Z |
Protective structure | IEC standard IP50 (when protective cover is installed) |
Подключение | Wire lead type (standard wire length 2m) |
Quality (after packaging) | About 75g |
Изоляционное сопротивление | 20M Омега или более (DC500V - мегаометр) |
Подключение | wire lead type (standard wire length 2m) |