Модельный фотодатчик M18
- Рабочее напряжение:15...30VDC
- Расстояние обнаружения:10...100mm
- Экспорт:0~10V ，4-20mA
- Operating frequency：80Hz
- Текущее потребление:≤20mA
- Output signal：PNP Analog
The working principle of the KJT analog photoelectric switch is based on the photoelectric characteristics of the photoelectric element. Its luminous flux changes with the measurement, and the photocurrent becomes a function of the measurement, so it is called the function operating state of the photoelectric switch. It can be used as photoelectric colorimeter, photoelectric displacement sensor, photoelectric distance meter, etc.
| Рабочее напряжение | 15...30VDC |
| Installation method | ---------- |
| Дальность обнаружения | 10...100mm |
| Model size | M18*1*65 |
| Output | 0~10V ，4-20mA |
| Operating frequency | 80Hz |
| Текущее потребление | ≤20mA |
| выходной сигнал | PNP Analogue |
| Switch point offset | ≤±10% |
| Load current | ≧4.7KΩ (voltage output) ≤470Ω (current output) |
| Отставание | 3...15% |
| Repeatability | ≤1% |
| LED display | ------------ |
| Short circuit protection | Short circuit, reverse polarity, overload protection |
| Working temperature | -10...50℃ |
| Temperature drift | <±10% |
| Protection class | МП67 |
| Shell material | Nickel plated brass |
| Detection surface material | ПБТ |
| Wiring | Cable 2 metres, OD ¢ 4.8mm |
