Список продуктов

Infrared cold metal detector
Infrared cold metal detector

Infrared cold metal detector

  • Shell type::Площадь
  • Working power supply::DC12V, DC24V, A110CV, A220CV; ±10% rated voltage
  • Operating Temperature::-25℃~+70℃

Cold metal detectors are mainly used in metallurgical production lines. They detect the position of the workpiece and output a switch control signal (contact or level signal) to participate in automatic control.

Cold metal detectors can be divided into two types according to the light source: visible red light type cold metal detectors and infrared light type cold metal detectors.

Cold metal detectors can be divided into feedback reflection type (R), through-beam type (T), and direct reflection type (D) according to the detection form.

1

Shell typeПлощадь
Рабочее питаниеDC12V、DC24V、A110CV、A220CV;±10% Rated voltage
Рабочая температура-25℃~+70℃
Detection formFeedback Reflective(R)Through Beam(T)Direct reflection(D)
Check distance

12m(SP-17-type reflector)

6m(SP-18 reflector)

Пятнадцать метров.1,2 м
Output formatКонтакты (Z)
Contact Capacity:AC250V/5A;DC30V/5A
Level12 ВЗагрузочный ток 100 мАPNP Normally Open:A(P);PNP Normally Closed:B(P)
Загрузочный ток 100 мАNPN Normally Open:A(N);NPN Normally Closed:B(N)
24В
Загрузочный ток 100 мАPNP Normally Open:C(P);PNP Normally Closed:D(P)
Загрузочный ток 100 мАNPN Normally Open:C(N);NPN Normally Closed:C(N)
Optical IsolationMaximum input operating voltage ≤DC27V,Load current100mA
Indicator Lights≥20MΩ(When DC500V)
Изоляционное сопротивление5 Вт
Потребление электроэнергииcontact<20ms;Level and Isolation<2ms
Время откликаIncandescent lamp 10000Lx
Устойчивость к световым помехамInstantaneous clockwise rotation, from low to high
ЧувствительностьЗащита от входной полярности постоянного тока, короткого замыкания на выходе уровня и перегрузки
Operating AngleAzimuth angle can be adjusted arbitrarily, elevation angle ±45°
РазмерLength × width × height 185 мм × 116 мм × 73 мм



Рекомендуемые продукты